Guide to upscaling video in the browser
Give footage you already have a higher output resolution: 720p, 1080p, 2K or 4K. Add MP4 or MOV files, or paste direct links to video files. Up to 8 clips can be queued in one batch.
The tool re-renders each frame of a clip at a larger size. Three models are offered (Standard, Pro and Ultimate), and the price in credits follows the length of the source. Clips in a batch are processed as individual tasks, and finished files are kept in your history for download.
Upscaling a clip in four steps
One source clip is enough to begin. It can be a file from your device or a link that points straight at a video file; links to social posts are not imported. The length of the source is read to calculate the price, and clips of up to 600 seconds (ten minutes) are accepted.
- 01
Add the source
Files from your device must be MP4 or MOV and no larger than 50 MB. A link must lead to the media file itself and be publicly reachable. Pages with an embedded player, private cloud folders and links that expire mid-process will not work.
- 02
Set the output resolution
Four tiers are available: 720p, 1080p, 2K and 4K. Full HD suits most uses; 4K is intended for larger finishing work. Hold on to the original so the same frames can be checked against the result.
- 03
Select a model
Standard, Pro and Ultimate each show a sample price. The exact figure for your clip appears once you are signed in. A new quote is issued whenever the model or the resolution changes, so the amount confirmed always matches what is submitted.
- 04
Check the result, then download
Progress is shown in history. Play the finished file and look closely at motion, thin lines, faces and lettering before taking it into an editor. The sample clips in the player are sources for trying the form and are not presented as measured before-and-after results.
Picking between 1080p, 2K and 4K
The right tier depends on where the clip will be shown. Going from 720p to 1080p is a moderate step that is often sufficient. Going from 1080p to 4K makes sense when a project requires a 4K file. How much is gained varies with the footage and its compression, so judge the result at the size viewers will see it and do not rely on the resolution label alone.
Standard, Pro and Ultimate compared
These are three distinct models. The form lists the rate of each for the chosen resolution with a ten-second example, and the table further down gives the full set. Standard is the least expensive. Pro and Ultimate are currently priced the same at each resolution, which does not mean they produce the same picture; test both on your own clip.
What the source limits
Upscaling works from the picture information the clip already contains. Strong blur, heavy compression artifacts and very small text restrict what can be reproduced faithfully. Review a passage with movement as well as a still frame, and watch thin edges, hands, logos and textures that look stable in one frame and not in the next.
Resolution is not frame rate
Resolution describes frame size, while frame rate describes how many frames play each second. The form changes resolution only: it has no 60fps option and performs no frame interpolation. If a delivery needs both 4K and a specific frame rate, handle the frame rate separately in editing or conversion software.
Starter credits for a first test
A new account registered with an eligible email address is given starter credits. They are regular credits and can pay for a short upscale. Because Standard has the lowest rate, a brief clip at 720p or 1080p is the cheapest trial. The allowance is small, the quote is displayed before submission as usual, and longer clips or higher tiers require more credits.
Footage that is commonly upscaled
Typical sources include digitized older recordings, screen captures, phone clips and AI-generated video. Older recordings may carry interlacing, tape noise or strong compression, so try a short passage first. Phone clips are usually sharp and gain most when they must match a 4K timeline. Clips made with a video model, including those generated on this site, are often 720p or 1080p and can be upscaled once downloaded. Always upload the cleanest export, not a copy re-saved from a social app.
Preparing a clip and checking the output
Cut the clip down to the part that is needed and export it without additional compression. Do not sharpen it beforehand, since sharpened edges tend to be exaggerated. View the result full screen and concentrate on faces, hands, hair, lettering and fast camera movement. If it remains soft, run the same short passage through another model before moving to a higher tier. Grading, stabilization, denoising and frame-rate changes are better handled in an editor.
Comparing the result with the original
Place both files side by side at the same display size, either on one timeline or in two players. Compare paused frames first and then the same seconds in motion, as some faults only show during playback: flicker in textures, shimmering edges, letters that change shape, skin that turns overly smooth. Listen to the audio if the clip has speech or music. Ten to twenty seconds of careful comparison is enough to settle on a model and a tier for the remaining clips.
Credit rates by model and resolution
The table gives the price of a 10-second source for every model and output tier. Your own quote is based on the detected length, rounded up to full seconds, and no task is charged for less than three seconds. A fresh quote is required after any change of model or resolution. Processing is paid for with credits.
| Model / resolution | 720P | 1080P | 2K | 4K |
|---|---|---|---|---|
| Standard | 8 | 8 | 15 | 30 |
| Pro | 30 | 60 | 90 | 120 |
| Ultimate | 30 | 60 | 90 | 120 |
Video upscaling FAQ
Is 4K output available?
Yes. 4K is offered together with 720p, 1080p and 2K. After signing in, the price for your clip is shown before you confirm. A 4K file produced by upscaling is not equivalent to footage shot in 4K, so review it against the source before final delivery.
Can I try the upscaler before buying credits?
New accounts registered with an eligible email address receive starter credits, which can cover a short upscale. Beyond that, each task is charged in credits at the rates in the table, and the pricing page lists the available plans. The price is always displayed before submission.
What is the maximum clip length?
600 seconds, which is ten minutes. Pricing uses the detected length rounded up to the next second, with three seconds as the minimum charge. When a link is used, it must stay reachable for both the length check and the processing.
Which file formats are accepted?
MP4 and MOV files of up to 50 MB can be uploaded from your device. A direct, public link to a video file can be used as well. Pick a model and an output tier, confirm the quote and follow the task in history.
Does the tool change the frame rate to 60fps?
No. It raises resolution only and offers neither a 60fps setting nor frame interpolation. If the final file must have a particular frame rate, convert it separately after downloading.
Will it repair blurry or old footage?
It makes a soft or low-resolution clip larger and often cleaner at the new size. It cannot restore detail that was lost to missed focus, motion blur or heavy compression. Process a short passage first and decide from the comparison whether the whole clip is worth running.
Which model is the best starting point?
Standard, when cost is the main concern, as its rate is the lowest. If the result falls short, repeat the same short passage with Pro or Ultimate and compare. The two share a rate at present but are different models, so the better one depends on the footage.
Can AI-generated clips be upscaled?
Yes. Download the clip from the generator and upload the MP4 or MOV file, or supply a direct link to it. Such clips are commonly 720p or 1080p, which makes 1080p and 4K the usual targets. Inspect faces, lettering and moving detail before publishing.
Related tools on this site
Upscaling is meant for footage that already exists. To create a new scene, use a video model; for still pictures, use the image tool.
Ready to raise the resolution of a clip?
Keep the original file, select the tier your project requires and confirm the quote. Review the finished clip against the source before it is published.